MCM Electronics network dvr series User Manual

H.264 NETWORK Embedded DVR USER MANUAL

10 Remark: You must after pressing “APPLY” to make the setting for submen

11 Press【Enter】or【+】【-】key or directly drag the cursor to set colors, in

12 LIVE TIME(display time while in live view)): ON: Means yes, OFF means n

13 PACK TIME: There are 15min, 30min, 45min, 60min four options, that mean

14 PORT: the communicate port between PC and DVR, recommend use default

15 If succeed, the IP address will be automatically config as dynamic IP o

16 via click the corresponding period. PLAY: You can press 【Enter】 input

17 can press【 】to pause and frame by frame play; Press【Exit】to exit from p

18 2.2.3. DEVICE SETUP Move the cursor to【DEVICE】（Icon with the orange bo

19 CH01~CH04: click to pop up pull-down box to switch to other channel t

2

20 PTZ Control 1. 2 3 All Functions Pointer Auto Pan To

21 Zoom in/zoom out Focus Iris Volume PTZ control the speed Ch

22 into setting interface. PORT: the port for mobile view, you should

23 Move the direction key on remote control to make cursor move in the sm

24 DATE: Setup system date via numeric key. DATE FORMAT: Press ENTER to

25 default password is: 123456), default password of [user1] is: 123456)

26 System language have Chinese ,English ,Russian ,Portuguese ,Spanish ,T

27 AUTO MAINTAIN: When switch is on, you can setup the time for dev

28 3. IE OPERATION 3.1. CONNECTION SETTINGS DVR through the remote acces

29 Figure 3-4 4. Double-click "Internet Protocol (TCP / IP)".

3 CONTENT 1. INTRODUCTION ...

30 Figure3-5 5. See PC's IP address, subnet mask, default gateway. (F

31 Remark: If you connect the device in WAN, the IP should be a public IP.

32 3.4.1.3 PTZ PRESET Setup preset point. You can control it via the bel

33 Step 4. Click specified video file which you would like to playback, r

34 Step 7. Playback control The above purple progress bar shows dow

35 Click to enter into setup interface; you can check the parameter s

36 when you see ” ” button, you can copy the setting to the channel whi

37 3.4.3.3 ALARM(Optional) Click and to enter into setup interface

38 3.4.3.4 PTZ Click to enter into setup interface; you can check the

39 Click ，enter into [UPNP] settings interface as below: After open U

4 1. INTRODUCTION 1.1. PREODUCT INTRODUCE The series of DVR include 4 ch

40 Click and to enter into setup interface; you can check the par

41 3.4.3.7 SYSTEM INFO Click to enter into system information interf

42 3.4.3.8 USER SETTING Click to enter into system information inte

43 FILE SAVE PATH: capture picture and recording video save path 3.4.5.

44 Connectors on Rear Panel Item Physical connector Connector descripti

45 Connection diagram of AC alarm input as following: The connection

46 System Network Diagram 3.7. HDD INSTALLATION Please installation the

47 Notice: Newly installed HDD should format before recording

48 4. FAQ If your problem is not listed below, please call our toll-free n

49 8. Question: No audio sound when playing back? Answer:  Setting pr

5 Mouse USB Mouse Remote control Support voltage input DC12V/5A 1.2.2.

50 5. P2P DIT Platform 1. Check user name and password on the label at the

51 Click WAN button and input DVR ID number、login password, then click l

52

6 2. DEVICE OPERATION In device operation, the enter key on remote contr

7 2. If press【LOGIN/LOCK】+【0】, then the remote controller can control devi

8 5. Click to enter/confirm and close the Virtual Keyboard. 2.1.4.

9 2.2. SYSTEM OPERSTION 2.2.1. USER LOGIN 2.2.1.1 STARTING THE SYSTEM